Configuration Three-way bass reflex enclosure using two 170mm hybrid Fibre glass/Nomex coned long throw Bass drivers (cast alloy frames), one 100mm cellulous fibre mid-range unit (cast alloy frame) and the same 35mm dual concentric tweeter that is used in the range topping Paragon.
Nominal Impedance 4 ohms
Power Handling Transient peaks in excess of 300 watts.
Average levels of 120 watts.
Sensitivity Transient peaks in excess of 150 Watts.
Average levels of 100 Watts.
Sensitivity 88dB input level of 2.83 Volts (1 Watt into 8ohms)
Frequency Response 38Hz to 40kHz ±3dB
Dimensions 1200H X 260W X 430D mm
Weight 45kg each
Finish Bubinga real wood veneer or Graphite (Metallic duco)
Warranty 5 Years

Return to Signature details page


Configuration

3-way floor standing speaker using a symmetrical speaker array. The bass section uses two 180mm Kevlar drivers in a rear ported enclosure. Two 100mm poly-glass drivers in a sealed enclosure cover the midrange frequencies. The tweeter uses a 35mm dual concentric diaphragm with a wave-guide centre plug. This tweeter uses an unusually large neodymium magnet structure.

Nominal Impedance 4 ohms
Amplifier Power Requirement Approximately 40 - 200 Watts per channel
Power Handling Transient peaks in excess of 250 Watts.
Average levels of 100 Watts.
Sensitivity 91dB input level of 2.83 Volts (1 Watt into 8ohms)
Frequency Response 35Hz to 40kHz ±3dB
Crossover Module Individually calibrated for each speaker in the pair for precise response match. Very high quality Cardas copper terminals. All internal cabling is Cardas high purity copper litz wire.
Dimensions 1420H x 285W x 380D mm. (Width including spikes is 400mmm)
Weight 75kg each.
Finish Dark charcoal with Santos Palissander or Bubinga real wood veneer sides. Other finishes available to order.
Warranty 5 Years

Return to Signature details page


Configuration 4-Way floor standing speaker using two 250mm sub-bass driver in Whise designed enclosure with its own in-built 350 watt amplifier. The bass section uses two 175mm sliced paper drivers in a sealed enclosure. Two 100mm poly-glass drivers in a sealed enclosure cover the midrange frequencies. The tweeter uses a 35mm dual concentric diaphragm with a wave-guide centre plug. This tweeter uses a unusually large neodymium magnet structure.
Nominal Impedance 4 ohms
Amplifier Power Requirement Approximately 40 - 250 Watts
Power Handling Transient peaks in excess of 250 Watts.
Average levels of 100 Watts.
Sensitivity 90dB input level of 2.83 Volts (1 Watt into 8ohms)
Frequency Response 25Hz to 40kHz ±3dB
Dimensions 1570H x 520W x 720D mm. (Width including spikes is 630mm)
Weight 140kg each
Finish Dark charcoal with Santos Palissander real wood veneer sides. Other finishes available to order.
Warranty 5 Years

Return to Signature details page