Configuration Three-way bass reflex enclosure using two 170mm hybrid Fibre glass/Nomex coned long throw Bass drivers, one 100mm cellulous fibre mid-range unit and a 35mm dual concentric tweeter which uses a wave guide centre plug.
Nominal Impedance 4 ohms
Amplifier Power Requirement 25 - 150 Watts
Power Handling Transient levels in excess of 300 watts.
Average levels of 120 watts.
Sensitivity 88dB input level of 2.83 Volts (1 Watt into 8ohms)
Frequency Response 38Hz to 40kHz ±3dB
Dimensions 1200H X 260W X 430D
Weight 45kg each
Finish Bubinga real wood veneer or Graphite (Metallic duco)
Warranty 5 years

Return to Performance details page


Configuration Two-way system Bass reflex enclosure using two 140mm cellulous fibre Bass/mid drivers and a 35mm dual concentric tweeter which uses a wave guide centre plug.
Nominal Impedance 4 ohms
Amplifier Power Requirement 25 - 120 Watts
Power Handling Transient levels in excess of 150 watts.
Average levels of 60 watts.
Sensitivity 89dB input level of 2.83 Volts (1 Watt into 8ohms)
Frequency Response 44Hz – 40kHz ±3dB
Dimensions 1080H X 215W X 325D mm.
Weight 30kg each
Finish Bubinga real wood veneer or Graphite (Metallic duco)
Warranty 5 years

Return to Performance details page


Configuration Three-way sealed enclosure using two 170mm hybrid Fibre glass/Nomex coned long throw Bass drivers, one 100mm cellulous fibre mid-range unit and a 35mm dual concentric tweeter which uses a wave guide centre plug.
Nominal Impedance 4 ohms
Amplifier Power Requirement Approximately 25 - 150 Watts
Power Handling Transient levels in excess of 300 watts.
Average levels of 120 watts.
Sensitivity 88dB input level of 2.83 Volts (1 Watt into 8ohms)
Frequency Response 78Hz – 40kHz ±3dB
Dimensions 290H X 665W X 360D
Weight 25kg
Wall Mounting Brackets Glass Fibre reinforced resin
Finish Bubinga real wood veneer or Graphite (Metallic duco)
Warranty 5 years

Return to Performance details page

 

Configuration Two-way bass reflex enclosure using two 140mm cellulous fibre Bass/mid drivers and a 35mm dual concentric tweeter which uses a wave guide centre plug.
Nominal Impedance 4 ohms
Amplifier Power Requirement Approximately 25 - 150 Watts
Power Handling Transient levels in excess of 150 watts.
Average levels of 60 watts
Sensitivity 89dB input level of 2.83 Volts (1 Watt into 8ohms)
Frequency Response 78Hz – 40kHz ±3dB
Dimensions 180H X 460W X 325D
Weight 11kg
Finish Bubinga real wood veneer or Graphite (Metallic duco)
Warranty 5 Years

Return to Performance details page


Configuration Two-way system in a sealed enclosure using two 140mm cellulous fibre Bass/mid drivers and a 35mm dual concentric tweeter which uses a wave guide centre plug.
Nominal Impedance 4 ohms
Amplifier Power Requirement 25 - 100 Watts
Power Handling Transient levels in excess of 150 watts.
Average levels of 60 watts.
Sensitivity 89dB input level of 2.83 Volts (1 Watt into 8ohms)
Frequency Response 78Hz – 40kHz ±3dB
Dimensions 460H X 215W X 325D
Weight 11kg each
Finish Bubinga real wood veneer or Graphite (Metallic duco
Warranty 5 years

Return to Performance details page


Configuration Two-way bass reflex enclosure using 0ne 140mm cellulous fibre Bass/mid driver and a 35mm dual concentric tweeter which uses a wave guide centre plug.
Nominal Impedance 4 ohms
Amplifier Power Requirement Approximately 40 - 100 Watts
Power Handling Transient levels in excess of 100 watts.
Average levels of 40 watts.
Sensitivity 85dB input level of 2.83 Volts (1 Watt into 8ohms)
Frequency Response 80Hz – 40kHz ±3dB
Dimensions 300H X 190W X 180D
Weight 6kg each
Finish Bubinga real wood veneer or Graphite (Metallic duco)
Warranty 5 Years

Return to Performance details page




Configuration 10" cellulose fibre coned driver with extremely long linear excursion (36mm) and a huge 3" voice coil. This driver is capable of higher output than most 12" driver.
Cabinet 25mm thick cabinet walls and extensively braced.
Amplifier Power 240W continuous power output. Line and speaker level inputs. Auto on/off switch. Continuously variable volume, phase and xover frequency
Bass Extension 23Hz - 3dB, usable bass down to below 20 Hz
Dimensions - mm 440H x 400W x 460D
Weight 34kg each
Finish Bubinga real timber veneer or Piano metallic graphite
Warranty 5 years

Return to Performance details page